Back

GHG accounting methodology

GRI reference: 302-2, 305-1, 305-2, 305-3, 305-4, 305-5

Greenhouse gas (GHG) reporting guideline

A Group-wide GHG Reporting Guideline was first developed in 2007 to specify the collection and compilation methodology of the Group’s GHG data. The Guideline was developed with reference to the following international standards and guidelines:

  • The Greenhouse Gas Protocol: A Corporate Accounting and Reporting Standard (Revised Edition) of the World Business Council for Sustainable Development (WBCSD) and the World Resources Institute (WRI);

  • The Greenhouse Gas Protocol: Corporate Value Chain (Scope 3) Accounting and Reporting Standard;

  • The Greenhouse Gas Protocol: Technical Guidance for Calculating Scope 3 Emissions (Version 1);

  • The 2006 Intergovernmental Panel on Climate Change (IPCC) Guidelines for National Greenhouse Gas Inventories;

  • Relevant IPCC Assessment Report;

  • The International Standard for GHG Emissions ISO 14064-1: Greenhouse Gases; and

  • Methodologies agreed with local authorities.

The CLP GHG Reporting Guideline is reviewed in accordance with CLP internal practices and updated with the latest references at least once every three years. The current Guideline was last updated in 2020.

CLP’s GHG emissions inventory covers six GHGs specified in the Kyoto Protocol, including carbon-dioxide (CO2), methane (CH4), nitrous oxide (N2O), hydrofluorocarbons (HFCs), and sulphur hexafluoride (SF6). Perfluorocarbons (PFCs) are also included but not used in CLP’s operations. Nitrogen trifluoride (NF3), the seventh mandatory gas added under the second Kyoto Protocol, was also considered for inclusion, but after evaluation was deemed immaterial to CLP’s operations. The GHG reporting scope definitions for GHG emissions are available here.

Focus has been given to sulphur hexafluoride (SF6), an insulating gas commonly used in switchgears and transmission lines. CLP is aware of its high global warming potential and therefore is vigilant in controlling SF6 leakage throughout the life cycle of electrical equipment, and actively exploring ways to reduce the use of SF6 in its business. For example, in Hong Kong in 2022, a field trial on non-SF6 gas switchgears at distribution level has started and availability of proven non-SF6 gas equipment at transmission level will be closely monitored.

Compilation bases

CLP reports the GHG emissions of its generation and energy storage portfolio on three consolidation bases to provide a comprehensive overview of its carbon footprint and progress in decarbonisation efforts. The three bases are:

  • Equity basis: This includes the electricity generated by CLP’s assets. It accounts for the Scope 1 and Scope 2 GHG emissions according to CLP’s equity share in the portfolio. The equity basis reflects economic interest, indicating the extent of GHG risks and opportunities CLP has from assets in which it holds a majority or minority share.

  • Equity and long-term capacity and energy purchases: This includes both electricity generated by CLP’s assets as well as the electricity purchased through capacity and energy purchase agreements. It allows stakeholders to better understand the GHG intensity of the electricity CLP delivers to customers. In addition to the GHG emissions from the equity basis, it also includes the direct GHG emissions from the generation of purchased electricity.

Purchase agreements help the Group meet local market needs and usually entail significant investment. To qualify for inclusion in this metric, these long-term capacity and energy purchase agreements must have a duration of at least five years and the equivalent capacity of 10MW or more.

  • Operational control: This represents the total GHG emissions from generation assets where CLP has direct influence and control on operational matters. CLP has been disclosing its combined total Scope 1 and Scope 2 GHG emissions on this basis for over a decade, and will continue to demonstrate its long-term progress.

Conscious of emissions along the value chain, in 2019, the Company conducted a review of its Scope 3 emissions and started to disclose Scope 3 emissions to present a more comprehensive picture of its footprint along the value chain. Scope 3 emissions typically represent less than 40% of CLP’s GHG emissions.

Calculation methodologies

Scope 1 & Scope 2 GHG emissions

The Scope 1 emissions and location-based Scope 2 emissions are calculated in accordance with CLP’s GHG Reporting Guideline outlined above.

Annually, CLP obtains emission factors from each business unit’s local government and authority in their respective jurisdictions. In cases where local emission factors are not available, other recognised sources are referenced.

Scope 3 GHG emissions

The table below summaries the Scope 3 categories that were identified as relevant to CLP, and how their emissions are calculated.

Scope 3 GHG emissions categories relevant to CLP

Scope 3 category

Relevance to CLP

Calculation and emission factors

1: Purchased goods and services

Emissions from the extraction, production and transportation of goods and services purchased or acquired.

a) Products-related emissions relate to the upstream emissions of EnergyAustralia’s natural gas retail business, including the emissions from upstream gas production and transmission, and distribution leakage in the State pipeline systems.

  • Assessed using the average-data method. The quantities of natural gas supplied are multiplied by State-based upstream emission factors to calculate the emissions.

  • Emission factors source: Australia’s National Greenhouse Accounts Report 2022.

b) Non-products-related emissions relate to the upstream emissions of CLP’s purchased goods and services other than natural gas for retail business.

  • Assessed using the spend-based method. Country-based World Input-Output Database (WIOD) factors are applied to the financial spend on the purchase of non-product-related goods and services.

  • Emission factors source: WIOD Release 2016.

2: Capital goods

Emissions from the extraction, production and transportation of capital goods purchased or acquired.

Relates to the upstream emissions of CLP’s purchased capital goods, mainly for infrastructure construction and facility upgrades.

  • Assessed using the spend-based method. Country-based WIOD factors are applied to the financial spend on the purchase of capital goods.

  • Emission factors source: WIOD Release 2016.

3: Fuel- and energy-related activities

Emissions related to the extraction, production and transportation of fuels and energy purchased or acquired.

Includes the upstream emissions of purchased fuels and electricity for CLP's power generation.

  • Assessed using the average-data method.

  • Upstream emissions (Well-to-tank, WTT) of purchased fuels and electricity are calculated by using volumes of purchased fuels and electricity and country-based WTT emission factors, where available. Where such volumes are not available, the ratio of the WTT emission factor to direct emission factor for each fuel type is applied to the Scope 1 and Scope 2 emissions of the generation assets.

  • Emission factors source: Australia’s National Greenhouse Accounts Report 2022, 2022 UK Government GHG Conversion Factors for Company Reporting.

Includes the direct emissions from the generation of purchased electricity that is sold to CLP's customers.

Includes the upstream emissions from the generation of purchased electricity that is sold to CLP's customers.

  • Direct emissions and upstream emissions from the generation of purchased electricity that is sold to CLP's customers are assessed using the supplier-specific method. This involves using emissions data of generation assets whose capacity and energy are purchased by CLP to meet customer demand. The calculation multiplies the percentages of capacity and energy purchased by CLP with direct emissions and upstream emissions (WTT) of the generation assets.

  • Emissions from the generation of purchased electricity that is sold to CLP's customers also include the emissions from the net electricity purchased by EnergyAustralia from the Australian Energy Market Operator (AEMO). This is assessed using the average-data method, which involves estimating emissions by using grid average emission factors, and is calculated through multiplying the net electricity purchased from AEMO with State-based emission factors.

  • Emission factors source: Australia’s National Greenhouse Accounts Report 2022, 2022 UK Government GHG Conversion Factors for Company Reporting.

5: Waste generated in operations

Emissions from the disposal and treatment of waste generated.

Emissions from fuel ash and gypsum as both represent the most significant waste material generated.

  • Assessed using the waste-type specific method based on waste produced by type.

  • Calculated through applying emission factors to quantities of fuel ash and gypsum generated at CLP’s coal-fired power stations, considering the disposal method.

  • Emission factors source: 2022 UK Government GHG Conversion Factors for Company Reporting.

6: Business travel

Emissions from the transportation of employees for business-related activities.

Air travel is the most material source of emissions from business travel. While CLP offsets the emissions from air travel, the emissions continue to be included in the GHG profile.

  • Assessed using the distance-based method.

  • Air travel emissions for CLP’s operations in Hong Kong and Australia are directly calculated using flight distance by travel classes multiplied by corresponding emission factors. Emissions from the other regions of operations are calculated through extrapolation based on CLP’s financial spend on business travel.

  • Emission factors source: 2022 UK Government GHG Conversion Factors for Company Reporting.

7: Employee commuting

Emissions from the transportation of employees between their homes and their worksites.

Relates to the emissions of CLP’s employees in commuting to offices and worksites. This typically includes emissions from automobile travel, bus travel, etc.

  • Calculated through the number of CLP’s employees, estimated travel mode and average distance travelled by region.

  • Emission factors source: 2022 UK Government GHG Conversion Factors for Company Reporting.

11: Use of sold products

Emissions from the end-use of products sold.

Relates to the downstream emissions of EnergyAustralia’s natural gas retail business, including the emissions from the combustion of natural gas supplied to customers.

  • Calculated through multiplying the quantities of natural gas supplied to customers by State-based emission factors.

  • Emission factors source: Australia’s National Greenhouse Accounts Report 2022.

The following categories were identified as not relevant to CLP, and hence not included in the Scope 3 emissions profile for reporting.

Scope 3 categories that are not considered relevant to CLP

Scope 3 category

Explanation

4: Upstream transportation and distribution

Emissions from the transportation and distribution of purchased goods and services.

The emissions are covered in Category 1 as the financial spend on transportation and distribution is embedded in the financial spend on purchased goods and services.

8: Upstream leased assets

Emissions from the operation of assets leased by the reporting company, i.e. lessee.

CLP does not operate leased generation assets. The emissions of leased offices are included in CLP’s Scope 2 emissions.

9: Downstream transportation and distribution

Emissions from the transportation and distribution of products sold between operations and the end consumer, in vehicles and facilities not owned or controlled or paid for by the reporting company.

Electricity and gas are the main products of CLP. Transportation and distribution of the products does not involve vehicles or facilities not owned or controlled by the Group.

10: Processing of sold products

Emissions from the processing of intermediate products sold by downstream companies, e.g. manufacturers.

With electricity and gas being CLP's main products, they are end products without a further processing requirement.

12: End-of-life treatment of sold products

Emissions from the disposal and treatment of products sold at the end of their life.

With electricity and gas being CLP's main products, there is no end-of-life treatment requirement.

13: Downstream leased assets

Emissions from the operation of assets owned by the reporting company (lessor) and leased to other entities.

Leasing is not a main business for CLP.

14: Franchises

Emissions from the operation of franchises.

CLP does not have any franchising business.

15. Investments

Emissions from operation of investments.

CLP reports Scope 3 emissions on an equity basis. This category applies to CLP only when an operational control basis is adopted and therefore does not apply.

We use cookies for the purpose of enhancing your user experience and helping us better understand how the site is used. By continuing to visit this site, you agree to our Use of Cookies.


Back to top